SawGear Part
SawGear replacement keypad membrane.
The SawGear Flip Away is the external portion of the SawGear carriage. It holds the stop bar and is hinged so it can be lifted out of the way.
This cable connects the SawGear motor to the circuit board inside the power head.
This rotary encoder works with SawGear only. The SawGear Encoder Cable is included as well.
SawGear Crown Molding Foot. Specially designed for cutting crown, baseboard, and trim.
The internal carriage connects the SawGear belt inside the beam to the flip away outside the beam. It ships with plastic glides and set screws.
The bench mount brackets allow you to attach the SawGear aluminum extrusion measuring bar to your tables of choice. Because we don’t know what material the bracket will be mounted on, fasteners are not included. Please note that BR-BM is […]
The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG08-AT5 is the large belt for an 8′ working length (10′ overall length) SawGear. (That’s a 2.4 m […]
The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG16-AT5 is the large belt for a 16′ working length (18′ overall length) SawGear. (That’s a 4.9 m […]
The SawGear has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG12-AT5 is the large belt for a 12′ working length (14′ overall length) SawGear. (That’s a 3.7 m […]