TigerStop Part
The internal carriage connects the TigerStop belt inside the beam to the flip away outside of the beam. It ships assembled with Linear Polymer Guides (LPG), and includes the belt clamp (ATC32).
The idle end pulley is for TigerStops using a 32mm (1.26″) width belt. It is compatible with the Idle End Carriage (IEC2).
The Idle End Carriage/Far End Carriage is for TigerStops using a 32mm (1.26″) width belt. It contains the idle pulley, the pulley housing, and the tensioning bolt. Learn more about the Idle End Carriage in the below video.
The Idle End Cap is a plate that covers the end of the TigerStop extrusion that is far from the motor.
The Gangstop pusher foot is a flat pushing attachment for the TigerStop. The pushing surface is 10 by 3 inches (25.4 by 7.6 cm). The Gangstop reach can be adjusted from 6 to 25 inches (15.2 to 63.5 cm) beyond […]
The Flip Away is the external portion of the TigerStop carriage. It provides two T-slots for mounting various pushing attachments, and a hinged mount to allow the pusher to be lifted out of the way when necessary. The modern flip […]
The extended pusher foot is a flat pushing attachment for the TigerStop. The pushing surface is 3.9 by 0.6 inches (9.9 by 1.5 cm). The extended pusher foot reach can be adjusted from 16.5 to 35.5 inches (41.9 to 90.2 […]
The extended miter gauge is an attachment for the TigerStop, intended for applications requiring a 45 degree surface, sloped away from the cutting tool. The adjustable miter retention clip prevents parts from sliding up the sloped surface as the positioner […]
Dust seal strip helps keep dust and debris out of the TigerStop beam. Dust seal strip is ordered in a single strip in 1 foot (0.305m) increments. Every TigerStop has two dust seal strips the full length of the beam.