TigerCrossCut

TCC-1

WHY YOU NEED A TIGERCROSSCUT

Cross cutting on a sliding table saw can be back-breaking work. Setting and re-setting your manual fence, making sure the strips are tight against the stop, and then sliding the saw bed back and forth, is a time consuming process. TigerCrossCut is an automated fence and stop system that can make cross cutting much easier and far more productive.  

The operator simply enters the part size he wants and TigerCrossCut will move to the specified length quickly and accurately, every time. TigerCrossCut’s dual flip stop system allows for cuts up to 120 inches (3m).

Features Include:

  • 120″ Working Length
  • +/- 0.003″ repeatability and accuracy
  • Easy-to-use LCD controller pad
  • Standard software with push/pull/position/cut list
  • Serial, USB, and Ethernet network options
  • One year bumper-to-bumper warranty

Easily Installs On:

  • Sliding table saws
  • Chop saws
  • Radial arm saws
  • Upcut saws
  • Docking saws
  • Miter saws
  • Boring equipment
  • Mortisers
  • Tenoners
  • And More!

Can be installed on most saws including: Altendorf, Bauerle, Casadei, Chambon, Delta, Ema, Forma, Giben, Griggio, Grizzley, HolzHer, Jet, Kamro, Kufo, Laguna, Lazzari, Lobo, Martin, Minimax, Panhans, Paolini, Powermatic, Robland, Rojek, Sac, SawStop, SCM, Sicar, Stema, Watkin, and many others.

ADD ON AUTOMATION TO TURN YOUR OLD SAW INTO A 21ST CENTURY WORKHORSE

TigerCrossCut can be easily added to almost any sliding table saw on the market. Why buy a new table saw when you can update your older, trusted machinery and get all the benefits of automation, for a fraction of the price? TigerCrossCut can even be upgraded to use TigerStops Dynamic Optimization software, which uses a proprietary algorithm to cut your parts with the least amount of waste possible.

BENEFITS

No more Setup Time
With TigerCrossCut, you don’t have to fiddle with manual stops. Just enter your length and cut. TigerCrossCut will take care of the accuracy so you can focus on making a quality product.

Adaptable
If you need more production, don’t buy a new saw. Turbocharge your existing table saw with TigerCrossCut!

Easy to Install
TigerCrossCut can be installed to most saws in just a few hours. You can install in the morning and be cutting dead-on parts by lunch.

Fast and Accurate…Every Time
TigerCrossCut has a repeatable accuracy rating of +/-.003 inches (.07mm). This means that tomorrow’s parts will be the same size as yesterday’s parts.

Posted in

Request A Quote